LANGUAGE:
EN RU CN
RU
NR arc protection system was successfully put into operation in Malaysia

Recently, the arc protection system of Malaysia Tenaga Nasional Berhad (TNB) 11kV Damansara Damai station was successfully put into operation.

The system applied PCS-9656M distributed arc protection solution, which is NR's first arc protection project in Malaysia, marking that NR's arc protection products have been recognized by TNB and officially entered the Malaysian market.

image.png

TNB is the largest national power company in Malaysia. The technical requirements are extremely strict, and it has great influence in Southeast Asia and some Middle East countries.

The 33kV and 11kV busbars of the substation are mainly connected by single bus section or double bus single section. There are many incoming line bays of the distribution system, with up to 8 incoming line bays. Overcurrent protection and zero sequence overcurrent protection are mainly used as the main protection of the bus.

TNB requires arc protection to adopt double criteria of phase current and zero sequence current, and the protection response time within 10ms, while the conventional arc protection scheme only supports the access of 6 incoming lines at most. If the access capacity is increased, more devices need to be configured, but the data interaction delay between devices will lead to the response time was non complaint with requirements.

To solve this problem, NR distributed arc protection system can support up to 4 buses and 12 incoming lines. A single machine can access 64 arc sensors. Each arc protection device shares arc action, current action and other information through high-speed data synchronization technology, so that the synchronous action time of arc protection at each bay can reach 8 ~ 9ms. It effectively solved the problem of delayed response protection for medium and low voltage buses in Malaysia. The excellent performance of this system has been highly recognized by users.

The successful operation of the project indicates that NR has mastered the multi incoming line and multi bays synchronous arc protection technology, further enriching the product line.

NR will continue to give full play to the technical advantages accumulated in the field of protection & control, and is committed to providing better products and solutions for the global market.

 


Back to list

© Copyright NR Electric Co., Ltd.
All Rights Reserved.

About us Service & Support Company Training Contact Us

Solutions Power Generation Transmission System Distribution Network Industrial Consumer

Products Protection,Automation&Control FACTS HVDC Renewable & Microgrid